Skip to content

ORDERING INFO

All Fields marked with asterisk(*) are required.

Interested in regular news about our products and services? Please tick the box below.

You can unsubscribe at any time using the 'unsubscribe' feature at the bottom of this page.

Ordering information as of March 2020

Amptek, Inc
14 DeAngelo Drive
Bedford, MA 01730 USA
Tel: +1 781 275-2242
Fax: +1 781 275-3470
Email: amptek.sales@ametek.com
Cards Accepted: Mastercard, Visa, American Express and Eurocard

 

Worldwide sales direct from the factory!
  • XR-100CR Si-PIN X-Ray Detector +


    XR-100CR

    Si-PIN X-Ray Detector with Preamplifier

    Exact part number for ordering:
     XY-FSG32MD-G2SP: 6 mm2/500 µm/0.5 mil Be/ML                                 
    XY-FSG32MD-Z2SP: 6 mm2/500 µm/0.5 mil Be/ML beveled cover             
    XY-FSG32MD-G3SP: 6 mm2/500 µm/1 mil Be/ML                                    

    XY-FSG32MD-G4BB: 6 mm2/500 µm/4 mil Be/ML                                    
    XY-FS432MD-G3SP: 13 mm2/500 µm/1 mil Be/ML                                  
    XY-FSJ32MD-G3SP: 25 mm2/500 µm/1 mil Be/ML                                   

    The XR-100CR requires a digital pulse processor and power supply such as the PX5 for operation.

    * Please note that when ordering vacuum extensions EXV5 (5″ extender) or EXV9 (9″ extender), the XR-100CR will be assembled with the extension you order; the part numbers listed above will change, and shipment will include a single part which combines the vacuum extension with the XR-100CR.  Please contact us with any questions on how to properly configure your order.

  • XR-100SDD Silicon Drift X-Ray Detector +


    XR-100SDD

    Silicon Drift (SDD) X-Ray Detector with preamplifier

    Exact part number for ordering:
    XY-GSH3AMD-G2SP: SDD 25 mm2/500 µm/0.5 mil Be/ML            
    XY-GSH3AMD-Z1SP: SDD 25 mm2/500 µm/0.3 mil Be/ML -beveled

    The XR-100SDD requires a digital pulse processor and power supply such as the PX5 for operation.

    * Please note that when ordering vacuum extensions EXV5 (5″ extender) or EXV9 (9″ extender), the XR-100SDD will be assembled with the extension you order; the part numbers listed above will change, and shipment will include a single part which combines the vacuum extension with the XR-100SDD.  Please contact us with any questions on how to properly configure your order.

  • XR-100FAST SDD® Silicon Drift X-Ray Detector +


    XR-100FAST SDD®

    FAST SDD® Silicon Drift (SDD) X-Ray Detector with Preamplifier

    Exact part number for ordering:
    XY-HSH3AMD-G2SP FAST SDD® 25 mm2/500 µm/0.5 mil Be/ML                                   
    XY-HSH3AMD-Z2SP  FAST SDD® 25 mm2/500 µm/0.5 mil Be/ML - beveled                     
    XY-HSH3AMD-Z1SP  FAST SDD® 25 mm2/500 µm/0.3 mil Be/ML - beveled                     
    XY-HSH3AMD-U0BA FAST SDD® 25 mm2/500 µm/C1 Window/ML                                 

    The XR-100FAST SDD® requires a digital pulse processor and power supply such as the PX5 for operation.

    * Please note that when ordering vacuum extensions EXV5 (5″ extender) or EXV9 (9″ extender), the XR-100FAST SDD® will be assembled with the extension you order; the part numbers listed above will change, and shipment will include a single part which combines the vacuum extension with the XR-100FAST SDD®. Please contact us with any questions on how to properly configure your order.

     
  • XR-100CdTe X-Ray and Gamma Ray Detector +


    XR-100CdTe

    Cadmium Telluride (CdTe) X-Ray and Gamma Ray Detector with Preamplifier

    Exact part number for ordering:
    XY-CC5420D-G4BB: CdTe 25 mm2/1 mm/4 mil Be (reset preamplifier)        
    XY-CC5420D-G9E0: CdTe 25 mm2/1 mm/1 mil Graphite (reset preamplifier)
    XY-CC5420D-G700: CdTe 25 mm2/1 mm/Ni cover(reset preamplifier)          

    The XR-100CdTe requires a digital pulse processor and power supply such as the PX5 for operation.

    * Please note that when ordering vacuum extensions EXV5 (5″ extender) or EXV9 (9″ extender), the XR-100CdTe will be assembled with the extension you order; the part numbers listed above will change, and shipment will include a single part which combines the vacuum extension with the XR-100CdTe.  Please contact us with any questions on how to properly configure your order.

  • X-123 Si-PIN Complete X-Ray Spectrometer +


    X-123

    Complete Si-PIN X-Ray Spectrometer

    Exact part number for ordering:
    ZY-FSG32MD-G3SP: Si-PIN 6 mm2/500 µm/1 mil Be/ML              
    ZY-FSG32MD-G2SP: Si-PIN 6 mm2/500 µm/0.5mil Be/ML            
    ZY-FSG32MD-Z2SP: Si-PIN 6 mm2/500 µm/Beveled 0.5mil Be/ML
    ZY-FSG32MD-G4BB: Si-PIN 6 mm2/500 µm/4mil Be/ML              
    ZY-FS432MD-G3SP: Si-PIN 13 mm2/500 µm/1 mil Be/ML            
    ZY-FSJ32MD-G3SP: Si-PIN 25 mm2/500 µm/1 mil Be/ML             

    * Please note that when ordering vacuum extensions EXV5 (5″ extender) or EXV9 (9″ extender), the X-123 will be assembled with the extension you order; the part numbers listed above will change, and shipment will include a single part which combines the vacuum extension with the X-123.  Please contact uswith any questions on how to properly configure your order.

  • X-123SDD Complete X-Ray Spectrometer +


    X-123SDD

    Exact part number for ordering:
    ZY-GSH3AMD-G2SP: SDD 25 mm2/500 µm/0.5 mil Be/ML                    
    ZY-GSH3AMD-Z1SP: SDD 25 mm2/500 µm/0.3 mil Be/ML Beveled cover

    * Please note that when ordering vacuum extensions EXV5 (5″ extender) or EXV9 (9″ extender), the X-123SDD will be assembled with the extension you order; the part numbers listed above will change, and shipment will include a single part which combines the vacuum extension with the X-123SDD. Please contact us with any questions on how to properly configure your order.

  • X-123FASTSDD® Complete X-Ray Spectrometer +


    X-123FASTSDD®

    Complete FAST SDD® X-Ray Spectrometer

    Exact part number for ordering:
    ZY-HSH3AMD-G2SP: FAST SDD® 25 mm2/500 µm/0.5 mil Be/ML                    
    ZY-HSH3AMD-Z1SP: FAST SDD® 25 mm2/500 µm/0.3 mil Be/ML Beveled cover
    ZY-HSH3AMD-U0BA: FAST SDD® 25 mm2/500 µm/C1 Window/ML                  
    ZY-HSH3AMD-E6EA: FAST SDD® 25 mm2/500 µm/C2 Window/ML                   
    ZY-HS63CMD-Y2SP: FAST SDD® 70 mm2/500 µm/0.5 mil Be/ML                     
    ZY-HS63CMD-W6EA: FAST SDD® 70 mm2/500 µm/C2 Window/ML                  

    * Please note that when ordering vacuum extensions EXV5 (5″ extender) or EXV9 (9″ extender), the X-123FAST SDD® will be assembled with the extension you order; the part numbers listed above will change, and shipment will include a single part which combines the vacuum extension with the X-123FAST SDD®. Please contact us with any questions on how to properly configure your order.

  • X-123CdTe Complete X-Ray and Gamma Ray Spectrometer +


    X-123CdTe

    Exact part number for ordering:
    ZY-CC5420D-G4BB: CdTe 25 mm2/1 mm/4 mil Be (reset preamplifier)           
    ZY-CC5420D-G9E0: CdTe 25 mm2/1 mm/1 mil Graphite (reset preamplifier)   
    ZY-CC5420D-G700: CdTe 25 mm2/1 mm/nickel cover (reset preamplifier)      

    * Please note that when ordering vacuum extensions EXV5 (5″ extender) or EXV9 (9″ extender), the X-123CdTe will be assembled with the extension you order; the part numbers listed above will change, and shipment will include a single part which combines the vacuum extension with the X-123CdTe. Please contact us with any questions on how to properly configure your order.

  • OEM Detectors with Preamplifiers +


    AXR Si-PIN with PA-210 or PA-230

    Si-PIN AXR detector element with PA-210 or PA-230 OEM preamplifier, 1 mil Be window

    *Does not include housing.  Please see “Other Detector Accessories” below for housing prices

    AXR SDD with PA-210 or PA-230

    SDD AXRSDD detector element with  PA-210SDD or PA-230SDD OEM preamplifier, 0.5 mil Be window

    *Does not include housing.  Please see “Other Detector Accessories” below for housing prices

  • External Collimators +


    External Collimator for Amptek SDD Detectors

    • eMLC-1  25mm2  Brass Housing  recommended for 40keV and below 1x MLC
    • eMLC-2  25mm2 Tungsten Housing recommended for 50keV and above 3x MLC
    • eMLC-3  70mm2 Brass Housing recommended for 40keV and below 1x MLC
    • eMLC-4  70mm2 Tungsten Housing recommended for 50keV and above 3x MLC

    Can be used to prevent wide angle x-ray input from being collected
    Offers additional protection for the thin windows

    EXVC Collimator Kit
    Collimator Kit for Medical or High Count-Rate Applications, please specify standard box, EXV5, or EXV9
    Tungsten Spacer for use with EXVC Collimator Kit
    EXVC-W-SPACER
    Tungsten (W) spacer/collimator for high energy X-rays above ~150 keV, 35 mm thick/300 µm hole
    Long EXVC Collimator Kit
    EXVC-LONG
    Long version of EXVC Collimator Kit, can accommodate up to 3 EXVC-W spacers (ordered separately)
    Can be used in high flux applications where the solid angle needs to be greatly reduced 
     
  • Vacuum Applications +


    EXV5

    5 inch detector vacuum extension for the XR-100 or X-123 (add to cost of detectors above)

    *The EXV5 will be assembled to the XR-100/X-123 as part of your order.

    EXV9

    9 inch detector vacuum extension for the XR-100 or X-123 (add to cost of detectors above)

    *The EXV9 will be assembled to the XR-100/X-123 as part of your order.

    CP75

    Vacuum feedthrough coupling on 2.75″ SS Conflat (for use with EXV5/9); metric equivalent DN40CF

    9DVF

    9 Pin D-Vacuum Feedthrough Connector on a 2.75″ SS Conflat; metric equivalent DN40CF

    TF3

    3 foot vacuum cable (XR-100 to 9DVF)

    ACH-403

    5 foot, 9 Pin D to 6-pin Lemo cable (9DVF to PX5); includes ACH-442 Gender Changer

  • Other Detector Accessories +


    MP1

    XRF Mounting Plate for use with XR-100 or X-123 detectors with the Mini-X X-ray tube

    PA-210 Housing

    Housing for the PA-210 preamplifier

    PA-230 Housing

    Housing for the PA-230 preamplifier

  • Complete Packaged OEM Systems +


    Complete OEM Packaged System with Si-PIN Option 1

    Complete OEM Packaged System with Si-PIN Option 4

    Complete OEM Packaged System with SDD Option 1

    Complete OEM Packaged System with SDD Option 4

  • EXP-2 Complete XRF Experimenter’s Kit +


    EXP-2 Complete XRF Experimenter’s Kit with FAST SDD® Detector

    EXP-2 Complete XRF Experimenters kit with FastSDD X-123 (25 mm2/500 µm 0.5 mil FAST SDD® detector) and 10W Mini-X2 X-ray Source

    EXP-2 Complete XRF Experimenter’s Kit with SDD® Detector

    EXP-2 Complete XRF Experimenters kit with SDD X-123 (25 mm2/500 µm 0.5 mil SDD detector) and 4W Mini-X2 Xray-Source

    Contact Amptek for other detector options including thinner Be windows

  • X-Ray Generators +


    Mini-X2-Ag

    Miniature X-Ray Tube and Controller with Silver (Ag) Target

    Mini-X2-Au

    Miniature X-Ray Tube and Controller with Gold (Au) Target

    Mini-X2-Rh

    Miniature X-Ray Tube and Controller with Rhodium (Rh) Target

    CP125

    Vacuum feedthrough coupling on 2.75″ SS Conflat (for use with Mini-X)

  • Digital Pulse Processors +


    DP5

    Enhanced Digital Pulse Processor for OEMs

    PC5

    Power Board for Amptek Detectors for use with the DP5
    (NOTE: The PC5 provides the power supplies for Amptek detectors. It is not required with the DP5 if the DP5 is used with non-Amptek detectors.)

    DP5G Kit

    Digital Pulse Processor for OEMs for use with Scintillation Detectors.
    Includes PCG power and connector board.

    PX5

    Enhanced Laboratory Digital Pulse Processor, MCA, and Power Supply for use with all Amptek detectors and other manufacturers’ detectors

    PX5-HPGe

    Digital Pulse Processor and Power Supply for High Purity Germanium Detectors (HPGe)

    PX5 Digital I/O Breakout Cable

    PX5 Digital I/O 15-Pin Breakout Cable, part number ACH-426

  • Multichannel Analyzers "Pocket MCA" +


    MCA-8000D

    Contents: MCA-8000D multichannel analyzer, AC Power Adapter, BNC signal cable (1 meter length), USB cable, RS232 cable, Software Installation CD. For use in nuclear instrumentation applications.

    MCA-8000D Option PA

    Contents: All MCA-8000D contents (see above) PLUS modification to facilitate airborne and suspended particle sizing (100k input impedance), NIST traceable calibration and certificate. For use in airborne and suspended particle applications only. Not for use in nuclear instrumentation applications.

    Option PA Calibration

    Periodic Calibration for Option PA as required (recommended every 12 months)

  • Scinitillation Detectors and Electronics +


    GAMMA-RAD5

    Ruggedized 76 mm x 76 mm NaI(Tl) Scintillation Detector & Digital Pulse Processor (DP5G)

    GAMMA-RAD5

    Ruggedized 76 mm x 152 mm NaI(Tl) Scintillation Detector & Digital Pulse Processor (DP5G)

  • Digital Tube Base for Scintillation Detectors +


    TB-5

    14 Pin Digital Tube Base for Scintillation Detectors (includes digital pulse processor, HV supply, and computer interface).  Contact us for OEM pricing.

  • Quantitative Analysis Software +


    XRS-FP2

    Quantitative Analysis Software for X-Ray Fluorescence (for use with Amptek detectors and electronics)

    EPXA

    Quantitative Analysis Software for Electron Probe Excitation (for use with Amptek detectors and electronics)

    SODIGAM

    Gamma-Ray Analysis Software for Scintillators. SODIGAM is the only high-precision analytical software for scintillation spectrometers to use physically correct descriptions of background, baseline, and peakshapes.  It contains many of the features normally found in programs designed for the high-precision analysis of HPGe spectra, and allows users to run samples from within the DPPMCA software.

    SODIGAM is only sold together with a Gamma-Rad5, TB-5, or DP5G.

    GAMMA-W

    Gamma-Ray Analysis Software for HPGe Detectors. Gamma-W software performs high-precision analysis of gamma-ray spectra from HPGe detectors, and is combined with the PX5-HPGe and your high-purity germanium detector.

    Gamma-W is only sold together with the PX5-HPGe.

  • High Voltage Optocoupler +


    HV801

    Call for pricing and specifications

  • Charge Sensitive Preamplifiers & Front-End Electronics (Hybrids) +


    A101

    Charge-sensitive preamplifier and discriminator

    A111

    Charge-sensitive preamplifier and discriminator

    A111F

    Low-profile SIP A111

    A121

    Preamplifier & discriminator

    A150

    Pulse amplitude discriminator

    A203

    Charge-sensitive preamplifier & shaper

    A206

    Pulse amplifier & discriminator

    A225

    Charge-sensitive preamplifier & shaper

    A225F

    Low profile SIP Charge-sensitive preamplifier & shaper

    A250

    Charge Sensitive Preamplifier “State-Of-The-Art”

    A250F & A250FNF

    Low Profile SIP Charge Sensitive Preamplifier “State-Of-The-Art”

    A275

    Pulse Amplifier

    A275FC & A275FN

    Low Profile SIP Pulse Amplifier

    BLR1

    Baseline Restorer

    PH300

    Peak-Hold Detector


  • PC11

    PC11 for A101

    PC21

    PC21: Test board for the  A111 or the A111F

    PC121

    PC121 for A121

    PC236

    PC236: Test board for the A203 & A206

    PC25

    PC25: Test board for the A225 & A206

    PC250

    PC250: Test board for A250

    PC250F

    PC250F: Test board for the A250F or A250F/NF

    PC275

    PC275: Test board for A275 & BLR1